Honda BF175

starting price

$27,995.00

The all new BF175 uses Honda’s big 3.6 litre V6 to offer a powerful, reliable engine that is smooth and economical. A high-performance gear case further contributes to the V6 engine series’ impressive acceleration and top-end speed. It features BLAST™ (Boosted low speed torque) for rapid acceleration, air/fuel ratio and ignition-timing technology, ECOmo Lean Burn Control® for exceptional fuel economy at cruise and NMEA which enables all engine and fuel data to be viewed on a GPS screen.

Of course, like all Honda outboards, you can rest assured that it’s kind to the environment.

Model BF175DXDD = 25”, Drive By Wire (DBW).

Also available in a 30”(ultra long shaft)


Type V6 4-stroke 24 valves
Displacement 3583cc
Bore & Stroke 89 x 96mm
Full Throttle RPM Range 5000-6000
HP Rating @ Propshaft 175HP @ 5,500 RPM
Valves per Cylinder Four
Fuel Delivery Programmed multipoint fuel injection
Ignition System Electronic
Starting System Electric
Cooling System Water cooled system with thermostat
Alternator 90-Amp

Honda’s class leading Drive By Wire system delivers superb control and smooth operation. Honda’s Drive by Wire provides an array of features all boaters are looking for, including faster response, effortless control, Trolling RPM control, and smooth shifting. It also allows for up to four engines and two control stations. All without the cables and maintenance of a traditional mechanical system.

Plus, with optional trolling control, it lets you control the engine rpms in increments of 50 rpm – Ideal for fishing.

Recommended Transom Height 25”
Dry Weight 285kg

***Please note Rigging, Gauges, Controls and Propeller are not included and will be ordered separately to customers requirements.

Gear Ratio: 1.87.1
Gear Shift: F-N-R
Propeller: Optional

The Automatic Idle Charge system meets increasing demand from onboard electronic equipment. At idle speed, if electrical demand increases the alternator automatically produces a higher output.

‘On Demand’ 90amp, belt-driven alternator reduces heat build-up and provides superior battery charging capability – 48amp at trolling speed!

4-Front Corrosion Protection. A patented, ‘double-sealed’ multi-layered paint process. Additional sacrificial anodes have been added inside the engine and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

The all-new gear case profile of the BF250 greatly enhances the hydrodynamics of the engine, increasing underwater efficiency.

A revised gear ratio of 2:1 has also been introduced. This ratio allows the engine to produce powerful thrust and propeller grip. These two features allow the BF250 to accept much larger diameter propellers.

An all-new Shift Load Control system reduces operator gear shift effort and facilitates smoother gear changing. When shifting from forward, reverse and neutral, the ECU analyses the engine speed and throttle position and in turn changes the ignition timing, modifying engine torque.

As a testament to their quality and reliability, all Honda engines come with a SEVEN year, non-declining, non-commercial warranty or a THREE year commercial warranty. Shop around, you won’t find a better warranty set up than Honda Marine.

Build Your Engine - Optional Extras

Click categories below to reveal optional extras. Send us the quote request and we’ll be in touch!

Propeller

Remote Control & Gauges for DBW

Digital Gauge Additions

To read fuel level, is needed if digital gauge. Customer must have a fuel sender in tank.
To read speed, is needed if no chartplotter on sounder, sounder needs to be NMEA2000 compatible.

Vibrastop Pads

NZ made Vibra-Stop backing pads. They are 15mm thick and are the ultimate in vibration reduction - nothing else comes close!
NZ made Vibra-Stop backing pads. They are 15mm thick and are the ultimate in vibration reduction - nothing else comes close!

175hp Counter Rotation

Add a second engine for a twin rigg set up.

Engine Installation *

Product price: $27,995.00
Total options:
Order total: