Honda BF200

starting price


The brand new Honda 200hp outboard engine delivers even more superior torque, top end speed and overall world class performance, reliability and durability in a narrow, balanced 60 degree V6 power plant. With a completely upgraded engine block, the BF200 is the ultimate four stroke.

It features BLAST™ (Boosted low speed torque) for rapid acceleration, ECOmo Lean Burn Control® for exceptional fuel economy at cruise and NMEA which enables all engine and fuel data to be viewed on a GPS screen.

Honda engineers have once again spent countless hours looking at ways of minimizing noise and vibration, with the result that Honda outboards are the smoothest and quietest on the market.

Packed with power, the entire brand new V6 range (BF200, BF225, BF250) incorporates Honda’s revolutionary Boosted Low Speed Torque (BLAST™) air/fuel ratio and ignition-timing technology, and Lean Burn Control to deliver powerful acceleration together with outstanding fuel economy during cruising (ECOmo).

A high-performance gear case further contributes to the V6 engine series’ impressive acceleration and top-end speed. All three engines are also NMEA2000 compatible, which allows the engines to communicate with onboard electronics to deliver a wide-range of information to head-unit displays.

  • BF200DXRD(RRP: $30,750.),
  • **BF200DXRDW (RRP: $31,250.),
  • BF200DXDD(RRP: $30,995.)
  • **BF200DXDDW(RRP: $31,495.)
    **Grand Prix White  – Subject to availability**
    Type V6 3.6 litre 4-stroke 24 valves
    Displacement 3583 cc
    Bore & Stroke 89 x 96
    Full Throttle RPM Range 5000-6000
    HP Rating @ Propshaft 200HP @ 5,500 RPM
    Valves per Cylinder Four
    Fuel Delivery Multipoint programmed fuel injection
    Ignition System Microcomputer programmed
    Starting System Electric
    Cooling System Water cooled
    Alternator 90AMP

Recommended Transom Height 20″, 25″& 30″
Dry Weight XL Type – 285kg

Gear Ratio 1.87:1
Gear Shift F-N-R
Propeller Optional

***Please note Rigging, Gauges, Controls and Prop are not included and will be ordered separately to customers requirements.

The Automatic Idle Charge system meets increasing demand from onboard electronic equipment. At idle speed, if electrical demand increases the alternator automatically produces a higher output.

‘On Demand’ 90amp, belt-driven alternator reduces heat build-up and provides superior battery charging capability – 48amp at trolling speed!

4-Front Corrosion Protection. A patented, ‘double-sealed’ multi-layered paint process. Additional sacrificial anodes have been added inside the engine and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

The all-new gear case profile of the BF250 greatly enhances the hydrodynamics of the engine, increasing underwater efficiency.

A revised gear ratio of 2:1 has also been introduced. This ratio allows the engine to produce powerful thrust and propeller grip. These two features allow the BF250 to accept much larger diameter propellers.

An all-new Shift Load Control system reduces operator gear shift effort and facilitates smoother gear changing. When shifting from forward, reverse and neutral, the ECU analyses the engine speed and throttle position and in turn changes the ignition timing, modifying engine torque.

As a testament to their quality and reliability, all Honda engines come with a SEVEN year, non-declining, non-commercial warranty or a THREE year commercial warranty. Shop around, you won’t find a better warranty set up than Honda Marine.

Build Your Engine - Optional Extras

Click categories below to reveal optional extras. Send us the quote request and we’ll be in touch!

Drive By Wire Model

Upgrade to DBW


Remote Control & Gauges for Mechanical


Remote Control & Gauges for DBW

Digital Gauge Additions

To read fuel level, is needed if digital gauge. Customer must have a fuel sender in tank.
To read speed, is needed if no chartplotter on sounder, sounder needs to be NMEA2000 compatible.

Vibrastop Pads

V6NZ made Vibra-Stop backing pads. They are 15mm thick and are the ultimate in vibration reduction - nothing else comes close! Excellent memory retention - will not compress over a period of time resulting in a loss of clamping force between the outboard engine and the boat.

we recommended these, especially on Aluminum boats

Engine Installation

Product price: $31,350.00
Total options:
Order total: